S1Vave 1.0: 8-Voice Virtual Analog Tweak Synth for M-VAVE FM-1

I am thrilled to announce the official release of S1Vave 1.0, an open-source firmware that transforms the portable M-VAVE FM-1 hardware (JieLi AC791N 32-bit RISC MCU) into an 8-voice virtual analog tweak synthesizer modeled after the classic SH-101 and S-1 architecture.
Every single aspect, from the classic oscillator core and sub-oscillator waveshapes to the cascaded 4-pole filter with self-oscillation, calibrated ADSR envelope curves, unique OSC DRAW and OSC CHOP sound manipulation, multi-waveform LFO with audio-rate Fast mode, stereo effects suite, and 1:1 MIDI CC implementation, has been modeled and calibrated for complete sound engine parity.

S1Vave live on M-VAVE FM-1: PTN 1-01, PERFORM page with CUTOFF, RESO, ENV AMT, PORTA T, real-time scope, and 8-voice LED allocation.
Highlights & Key Features
1. Classic Voice Architecture & Tweak Innovations
- 8-Voice Polyphony & Modes:
- MONO: Classic monosynth with authentic legato glide (auto-portamento).
- UNISON: 8-voice stacked unison with massive analog lead and bass presence.
- POLY: 8-voice dynamic polyphony for rich chords and lush pads.
- CHORD: Programmable chord memory with independent voice shifts (-12 to +12 semitones).
- Oscillator Core:
- Sawtooth: PolyBLEP anti-aliased classic saw.
- Square / Pulse: Wide-range Pulse Width Modulation (PWM) from 50% square down to ~5% needle pulse. Modulated via Manual duty cycle, Envelope sweep, or LFO.
- Sub-Oscillator: 3 authentic octave types:
-2o.A: 2 octaves below, 25% asymmetric duty cycle (signature SH-101 growl).-2oc: 2 octaves below, 50% symmetric square wave.-1oc: 1 octave below, 50% symmetric square wave.
- Noise Generator: Calibrated Pink Noise (analog 12 dB/oct roll-off above 1.8 kHz) and White Noise.
- Unique Wave-Shaping Features:
- OSC DRAW: 16-step wavetable drawing (
STEPmode for raw digital textures orSLOPEfor smooth interpolated waves), with a 1.0x to 32.0x frequency multiplier. - OSC CHOP: Harmonic comb slicing (1.0 to 32.0 repetitions) with overtone depth control (0–200, >100 phase inverted) for metallic textures and bell-like timbres.
- Riser / Downer: Built-in performance transition sweep generator (
SYNC,QUIV, andQV.PANmodes) for build-ups and dropouts.
- OSC DRAW: 16-step wavetable drawing (
2. Cascaded 4-Pole Filter & Calibrated Envelopes
- 4-Pole (24 dB/oct) Cascaded State-Variable Filter:
- Full 20 Hz – 20 kHz calibrated cutoff curve matching hardware pot response.
- Smooth analog resonance with self-oscillation and low-end bass retention.
- Keyboard tracking (0–100%) and bipolar filter envelope modulation.
- Dual filter character modes: Clean S-1 ACB and Warm Midnight soft-knee drive.
- Calibrated ADSR Envelopes:
- Precise exponential analog RC attack, decay, sustain, and release curves.
- Envelope trigger modes:
GATE,GATE+TRIG(re-triggers on overlapping notes), andLFO(cyclic re-triggering). - Amp envelope mode: Instant
GATE(organ style) or dynamicENV(ADSR shaped).
3. Modulation & Effects
- Versatile LFO Engine:
- 6 Waveforms: Sawtooth, Inverted Saw, Triangle, Square, Random (S&H), and Noise.
- Speed range: 0.05 Hz – 30 Hz in Normal mode, and up to ~100 Hz in Fast audio-rate mode.
- Tempo Sync: Locked to MIDI clock across 31 musical note divisions (8/1 to 1/128 triplets/dotted).
- Stereo FX Suite:
- Stereo Chorus: 4 chorus models (Type 1–4) with Hermite-interpolated delay lines.
- Tempo-Synced Delay: Stereo ping-pong delay with tape slewing when changing delay time and feedback tone filtering.
- Plate Reverb: High-density Dattorro figure-of-8 reverberator running at 44.1 kHz (7 room types: Ambient, Room, Hall 1, Hall 2, Plate, Spring, Mod).
4. Sequencer, Presets & USB Connectivity
- Dual-Track 64-Step Sequencer: Two polyphonic tracks (A and B) sharing 256 steps with independent length, clock division, swing, transpose, sub-step ratchets (1–4), per-step probability, and motion recording.
- 64 Factory Presets: Programs 1–64 come pre-loaded with authentic factory sounds and patterns; slots 65–99 are available for user programs.
- USB Audio & Class-Compliant USB MIDI: 44.1 kHz / 16-bit stereo USB Audio with zero-glitch ring buffering, plus 1:1 MIDI CC control.
Hardware Panel Controls (M-VAVE FM-1)
The M-VAVE FM-1 features 4 push-encoders (K1–K4), 8 function buttons, and 16 step keys:
| Page / Button | KNOB 1 (K1) | KNOB 2 (K2) | KNOB 3 (K3) | KNOB 4 (K4) |
|---|---|---|---|---|
| HOME (PERFORM) | Cutoff (FREQ) [CC 74] | Resonance (RESO) [CC 71] | Env Depth (ENV) [CC 24] | Portamento Time [CC 5] |
| EDIT (OSC CORE) | Range (64'..2') [CC 14] | Square Level [CC 19] | Saw Level [CC 20] | Sub Level [CC 21] |
| EDIT (PWM) | PWM Source [CC 16] | Pulse Width / Duty [CC 15] | Square Level [CC 19] | Sub Octave Type [CC 22] |
| EDIT (SUB/NOISE) | Sub Type (-2o.A, -2oc, -1oc) | Noise Level [CC 23] | Noise Mode (Pink/White) | Fine Tune [CC 76] |
| EDIT (OSC DRAW) | Draw Switch (Off/Step/Slope) | Multiply (1.0x–32.0x) | PWM Source [CC 16] | Pulse Width [CC 15] |
| EDIT (OSC CHOP) | Chop Overtone (0–200) [CC 103] | Chop Comb (1.0–32.0) [CC 104] | - | - |
| EDIT (FILTER) | Filter Cutoff [CC 74] | Filter Resonance [CC 71] | Filter LFO Depth [CC 25] | Key Follow (0–100%) [CC 26] |
| ENV (ADSR) | Attack [CC 73] | Decay [CC 75] | Sustain [CC 30] | Release [CC 72] |
| LFO (CORE) | LFO Rate [CC 3] | Waveform [CC 12] | Tempo Sync [CC 106] | Fast Mode [CC 79] |
| FX (MIX) | Chorus Mode [CC 93] | Delay Level [CC 92] | Reverb Level [CC 91] | Delay Time [CC 90] |
| GLO (VOICE) | Poly Mode (Mono..Chord) [CC 80] | Portamento Mode [CC 31] | Transpose [CC 77] | Master Volume [CC 7] |
Interactive Web Tools & Simulator
You can test, flash, and monitor S1Vave directly from your web browser:
Flash S1Vave to your M-VAVE FM-1 directly over WebUSB / WebMIDI.
Real-time bidirectional MIDI parameter editor, A/B calibration, and preset manager.
Play the complete S1Vave engine compiled to WebAssembly with virtual hardware panel.
GitHub Repository & Open Source
S1Vave is free and open-source software released under the GNU General Public License v3.0 (GPL-3.0-only).
- 📦 GitHub Repository: https://github.com/AndrewGG88/S1Vave
- 📖 Documentation: Full technical DSP guides, MIDI implementation charts, and fixed-point build instructions are available in the repository.